Get All The Info On Technology News, and Products
Policy based IPSEC tunneling is probably the most widely used technique to get two offices to communicate securely (at least in the SMB Market). Today I’m going to discuss how you can configure two ASA’s to failover to their secondary WAN, and then have their tunnels fail over as well. One should always aim for …
Continue reading “Cisco ASA Site to Site VPN Failover How-To”
With code 9.7 released Cisco decided to add two VERY important features. Route based VPN with VTIs, and bridge groups! This article will show a quick configuration of a route based VPN with ASAs! Previously to do something like this you would need to build a GRE tunnel over IPSEC with a second router terminating …
This article will discuss setting up Cisco Anyconnect with LDAP/Domain Authentication. I will be showing both the ASDM/GUI and CLI commands. I recommend the GUI method once, then use the CLI once you understand it. Replace the following below with your own: “10.0.1.10” with your AD/DNS Server “DC=SDC,DC=LOCAL” with the base DN of your Domain, my …
Today I’m going to show you exactly how to configure IPSEC failover between a Cisco ASA and A Palo Alto. Network: 1 ASA, 2 wan circuits 1 Palo, 1 wan circuit Let’s assume at the ASA side 20.0.3.2 is our primary WAN circuit and 20.0.4.2 is the backup circuit we have just …
Continue reading “Cisco ASA to Palo Alto Site to Site IPSEC VPN Failover”
The situation: Company XYZ has decided to invest in a new internet connection, this connection should be used as a backup. The new WAN connection has been plugged into interface g0/8 of our 5506-X and we are ready to begin the configuration. The solution from the CLI: Go into the interface Conf t Int …
Continue reading “Cisco ASA 5506-X Complete Wan Failover Guide”